GENERAL SPECS FOR HEATERS




Main as well as extra burners: Different electrically spark-ignited major heating units along with second heating systems with automatic control will certainly be used to accomplish the specified temperature level needs in the additionally added as well as major chambers. The fires of the main and also additional heating units will not strike the burner wall surface surfaces or floor.
The main burning chamber need to:

1. Be accepted as the primary burning zone.
2. Be geared up with a burner/s melting gas/fuel or reduced sulphur fluid gas.

3. Make certain key air supply is controlled efficiently

Make sure minimal leave temperature degree is not a lot less than 850oC

Air supply: Air supply in the secret and likewise 2nd chamber requirement to be managed in between 30% -80% as well as 170%- 120% of stoichiometric quantity specifically. The combustion air will certainly be offered by means of a various forced draft fan after accounting for the air provided via burners.The second combustion chamber have to:

1.

3.

4.

5.
6. Ensure the gas temperature level as assessed against the inside wall surface in the secondary chamber & & & & not in the fire area, is very little less than 1100oC.

7. Make sure the oxygen web content of the released gases is not much less than 11%.
Make specific both main along with the burning temperature levels are maintained till all waste has actually been completely combusted

lnsulation: lnsulation to be utilized for stonework, boosted concrete, or non-combustible item will secure versus damages to the framework from extreme cozy as well as shall be of a density to limit the outside covering to an optimum temperature level of 66 ° C in an ambient temperature of 21 ° C when the heater is running at complete capacity.

Refractory: Refractory shall be #super responsibility # along with heat-resistant to a minimum of 1100 ° C in the vital chamber in addition to 1250 ° C in the secondary chamber. Refractory will also be abrasion immune in the prlmary chamber, built of plastic or castable kind refractory, developed to prevent protruding and additionally damage as a result of warmth tension, efficient in maintaining greater than twice the per hour burning price along with securing against leakage of fluids, as well as likewise with a minimal thickness of 11O mm for wall surfaces and also fire places


HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan. Mobile: +86-13813931455(WhatsApp) Website: www.hiclover.com Email: [email protected] Email: [email protected]

Posted in Blog