hiclover.com macau pet cremation incinerator

Presently, we supply different series for local customer requirements and design 

updated incinerator with our leading technology. The updated design feature 
of our range of incinerators make them one of the most cost effective in the world.
Key Features:
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. 
* High temperature, long lifetime of incinerator.
* Free or minimum installation on site.
* High burn rate, from 10kgs to 600kgs per hour, up to 10ton per day.
* PLC Control Plane for Intelligent operation. 
* New Design for pet animal cremation business.
* One year warranty on incinerator and parts in stock.

It features unique and advanced merits with compact size, high burning effect, 
reasonable burning technology, high degree of non-harm etc.It is an ideal 
choice for waste treatment of hospitals, hotels and various areas.


(5)   Compact structure and small land occupation.
WWW.HICLOVER.COMWaste Incinerators Auto Roll Air Filters
Nanjing Clover Medical Technology Co.,Ltd.

(1)   Gasifiedpyrolysis incineration is used for burning many Types of waste.

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800–1000 800–1000 800–1000 800–1000 800–1000
2nd. Chamber Temperature 1000-1200 1000-1200 1000-1200 1000-1200 1000-1200
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Tel:  +86-25-8461 0201   

PRIMARY CHAMBERHeavy-duty steel casingHigh quality refractory lining and insulation Large full size top load counterbalanced door1 x oil/gas fired ignition burners operated on/off

SECONDARY CHAMBERHeavy-duty steel casingHigh quality refractory lining and insulation 2 second gas residence time1 x oil/gas fired ignition burners operated on/off

CHIMNEYHeavy-duty stainless steel casing

Thermostat control device for burner (fuel saver) Timer 
control 0- 12 hours
Integral fan timer control

CONTROL PANELControl of primary and secondary burners Temperature Monitoring with 4 digit display 

ANCILLARIESOperating and maintenance manuals Spares list


•Afterburner Preheat

•Incineration temperatures in excess of 1300°C

•5mm steel casing and completely insulate

•Dense refractory concrete lining ranked to 1600°C 

The regulated sections may include but not limited to:

An approved plant must have four different sections that demonstrate three principles ofTurbulence, Residence Time and Temperature are inbuilt in the plant design.

Overall plant layout.  Feed chamber/ chargingPrimary Combustion Chamber.  Secondary Combustion Chamber.  Particulate ScrubbersAcid Gas Scrubbers The stack/ chimney.Controlled hygienic, mechanical or automatic feeding methods have to be used whichwill not influence the air temperature in the primary and secondary chambers of the incinerator negatively.

No waste is to be fed to the incinerator:

1. If the minimum combustion temperatures are not maintained.3. Whenever the previous charge has not been completely combusted in the case of batch feeding.4. Until such time as the addition of more waste Won’t cause the layout parameters of the incinerator to be exceeded.The primary combustion chamber should:

Other combustion methods will be judged on merits.

1. Be equipped with a burner/s burning gas/fuel or low sulphur liquid fuels. 

3. Ensure main air supply is controlled efficiently

4. Ensure minimum exit temperature is not less than 850oCThe secondary combustion chamber should:

1. Be accepted as secondary combustion zone.2. Be fitted with secondary burner/s burning gas or low sulphur liquid fuel or any Appropriate fuel.

chamber & not in the flame zone, is not less than 
7. Ensure the oxygen content of the emitted gases is not less than 11%.
8. Ensure both primary and the combustion temperatures are maintained 
until all waste has been completely combusted
A mechanical particulate collector must be incorporated after secondary combustion
chamber for removal of particulate pollutants entrained in the flue gas stream. 
The particulate collectors may include any of the following or 
a combination thereof:
Cyclone separator Electrostatic precipitators Fabric filters

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan. Mobile: +86-13813931455(WhatsApp) Website: www.hiclover.com Email: [email protected] Email: [email protected]

Posted in Uncategorized | Tagged