animal cremation

Technical Specifications of External SHREDDER Controls:

  • Pre-programmed PLC controlled
  • Password activated and reversal history indication
  • Motor starter with overload protection
  • Automatic instantaneous stop on hard object in shredder bed
  • Automatic heavy cutting load reversal and re-try , up to three times
  • Control housing Nema type 12


Cutting Hardwires:

  • Chamber Dimensions(WxLxH): approx 33 c m x 38 cm x 25cm
  • Number of knives: Approx 18 or to suit customer needs
  • Knife Thickness: Approx 18mm or to suit customer needs
  • Knife Diameter: Approx 16cm or to suit customer needs
  • Tecth per Knife : minimum 3
  • Number of Shafts: 2 ie double shaft shredder


Drive of the shredder:

  • Must be motor driven
  • Motor Horsepower : approx, 10 HP
  • Motor RPM: minimum 1750
  • Speed Reduction: 60:1
  • Generated Torque; min 40 Nm or 350 lbs/in
  • Gearbox: should be parallel shaft
  • Shock protection: Rubber mount torque arm
  • Power : 220vac, 1ph or 400 VAC, 3 ph or suit customer needs


Ancillaries to be included:

  • Sherdder stand, fabricated from 3” sq. steel tube, standard height 30 inches
  • Shredder hopper , fabricated form 16 gauge steel, with optional switched hopper lid.


(E) Features & Technical Specification of Conveyer:

To carry processed waste from vessel to shredder



  • Motor starter overload protection
  • Control housing Nema Type 12
  • Safety pull stops along both sides of conveyor



  • Conveyor stand , fabricated from 2” sq. steel tube
  • Raised sidewalls fabricated form 16 gauge steel



  • Over-all length: between 20-25 feet or appropriate length depending on the installation requirement.
  • Over-all width: between 24-30 inch
  • over-all (without including stand) : between 12-14 inch
  • Available inclines: 0-40 degrees



  • Belt Speed: 75 fi/min
  • Dam spacing; approx, 16 inch



  • Motor driven
  • Horsepower: Approx .075
  • Motor RPM: approx.60
  • Electrical power input: 220 vac. 1ph or 400 VAC, 3 ph or to suit customer needs.


(F) Technical Specification of tipper features:

  • It is to be designed to allow for easy bin positioning under the door to unload processed waste and easy

inaneuverapility for lifting and tipping the waste into the shredder hopper.

  • Equipment with 2 bins to accommodate processed waste loads to be loaded into the shredder and shredded waste to be

transported to the disposal bin.

  • Frame: Rugged heavy duty frame constructed of formed and welded steel formed and welded steel for extra strength.
  • Mast: Fabricated with channel steel for greater strength and dependability. Open structure design complete with

safety cage to offer greater visibility

  • Lifting Chains: Must be dual lifting chain of roller style & must meet safety factor at least 6:1
  • Hydraulic system: durable cylinder with a chrome plated ram and a relief valve for overload protection
  • Forks: Heavy duty approx 4.0” wide x 42” long fixed forks.
  • Platform; solid steel
  • Battery: A heavy duty 12 volt, 125 amps/hour industrial strength battery.
  • Overload protection plugs into any 220 VAC outlet.
  • Steering: A pallet truck style steer handle for steering and approx. 4” phenolic wheels with roller bearings located

in the straddle legs.

  • Brake: A hand controlled floor lock brake that secures the unit in place.



  • Load capacity; Approx 1500 lbs
  • load centre: Approx 24 inch
  • Raised fork height: to suit customer needs
  • Overall must height: to suit customer needs
  • Lowered height: minimum 4.0 inch
  • Fixed fork width: approx 7 inch
  • Fork length : approx 42 inch
  • Platform of approx.25”x25”
  • overall width approx 25 inch
  • castors: approx 5 inch phenolic
  • Front wheel : approx 4 inch phenolic

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan. Mobile: +86-13813931455(WhatsApp) Website: Email: [email protected] Email: [email protected]

Posted in Blog